24
ENA 5
Rinsing of the filter stops automatically,
CLOSE TAP.
y T Turn the switch to position o.
HEATING
READY
Changing the filter – manually
The ‘Change filter’ operation can be manually
initiated.
Precondition:
READY appears on the display.
T Open the cover behind the Rotary Switch.
P T Press the P button until RINSE appears.
k T Press the Rotary Switch to enter the
programme item.
RINSE
g T Turn the Rotary Switch until FILTER is
displayed.
k T Press the Rotary Switch.
INSERT FILTER
T Continue with the third prompt to take
action (indicated by
T), as described in the
section ‘Changing the filter following a
prompt’.
Cleaning the machine following a prompt
After 180 coffee preparations or 80 switch-on
rinses, the ENA will prompt you to clean the
machine.
CAUTION
If the wrong cleaning agent is used, the machine
could be damaged and/or detergent residues
could be left in the water.
T Only use original JURA care products.
E The cleaning programme only lasts about
15 minutes.
E Do not interrupt the cleaning programme.
The quality of cleaning will be impaired if
you do so.
E JURA cleaning tablets are available from
stockists.
Precondition:
CLEAN / READY is displayed.
T Open the cover behind the Rotary Switch.
c T Press the maintenance button.
EMPTY TRAY
T Empty the coffee grounds container and
drip tray and replace.
PRESS ROTARY
T Turn the coffee spout to the cleaning
position.
T Place a receptacle under the coffee spout.
k T Press the Rotary Switch to start cleaning.
CLEANING, water flows out of the
coffee spout.
The process is interrupted.
ADD TABLET
T Open the powder chute for for pre-ground
coffee and drop in a JURA cleaning tablet.
T Close the powder chute for pre-ground
coffee.
PRESS ROTARY
k T Press the Rotary Switch.
CLEANING, water flows out of the
coffee spout several times.
EMPTY TRAY
T Empty the coffee grounds container and
drip tray and replace.
READY
Commentaires sur ces manuels